Step 1 | Prepare
Step 1 | Prepare
-
Omega Auto Ace Rust RemoverOmega Rust Remover is a Phosphoric acid based product specially formulated to chemically remove rust from iron and steel leaving a short term protective coating ready for priming and filling. It is suitable for all accessible areas that are to be immediately primed or rust proofed. The trigger pack ensures economical application to the rusted areas and access to difficult to reach areas. The 500ml bottle can be used as a refill or to brush on. Available in 250ml & 500ml
-
Omega Auto Ace Rust Converter Primer SealerOmega Rust Converter Primer & Sealer is a tannic acid-based rust converter that converts rust to a black stable primed finish preventing further corrosion. It can be primed, filled, and painted over to give additional corrosion proofing or sound dead-ending. It is suitable to treat rust in all areas where Omega Rust Remover is recommended and is ideal for use in inaccessible areas and for tools and components that are usually not primed or rust proofed.
Available in 250ml, 500ml & Aerosol
-
Omega Auto Ace Fast StripOmega Fast Strip is a fast acting heavy bodied automotive and industrial strength paint remover formulated to rapidly strip automotive paints (including 2 pack) from concrete, glass, masonry, metals and timber.
Available in 1lt, 4lt & Aerosol
-
Omega Auto Ace Wax & GreaseOmega Wax & Grease is a fast acting, high quality cleaning solvent used for cleaning surfaces at various stages of repair and finish including filling, sealing, priming and top coating. Promotes surface adhesion and will remove heavy contamination such as wax, grease, oil, tar, and road grime. It will also clean less obvious contaminants such as dust, finger marks and silicone which can cause defects in refinishing. Particularly suited to 2 Pack, Acrylic, Auto Enamel and Quick Dry paint systems.
Available in 1lt, 4lt & Aerosol
Shopping cart
No products in the cart.
Calculator
How much do I need?
Measured by
Surface area
Dimensions
Total surface area
square metres
Your calculated area is 0 m2
This requires approx. 0 L per coat