Pro Series

Weatherblock Exterior Paint

Product code: A-WEWL

WeatherBlock Exterior is a premium self-priming coating designed for long lasting performance against the harsh Australian climate with excellent UV, mould, dirt and mildew resistance. WeatherBlock Exterior has lifetime guarantee* against blistering, flaking and peeling. This acrylic water based semi-gloss finish for exterior use on concrete, cement, bare timber, brick, fibre-cement board, masonry and galvanised iron.

The product is easy to apply, has excellent coverage and low dirt pickup. Self-priming in most cases and quick drying. Water wash up for your paint equipment and no harsh solvent odour. It has Superior Mould Resistance and a Life Time Guarantee*

* Conditions apply, refer to guarantee terms and conditions.

SurePrep 3 in 1

Product code: A-SPW

SurePrep 3 in 1 Acrylic Primer/Sealer/Undercoat is a premium quality, fast drying, water based, interior and exterior multipurpose primer/sealer/undercoat. Formulated primarily to provide a sealed and sandable surface for acrylic and solvent based topcoats.

SurePrep 3 in 1 combines the qualities desired in an interior/exterior primer: Excellent adhesion, and filling properties, low spatter, sandability, minimal odour, excellent flow and levelling. May be applied by brush, roller or spray. Contain anti fungicidal additives and may be tinted to facilitate contrasting colours. SurePrep 3 in 1 Acrylic Primer/Sealer/Undercoat is environmentally friendly, non-toxic, nonhazardous and non-flammable.

OilPrep Enamel Undercoat

Product code: A-OW

OilPrep Interior/Exterior Enamel Undercoat is a premium oil based premium undercoat designed as an intermediate coat for all primed timber and metal substrates.

The OilPrep Enamel product is easy sanding, quick drying, providing high opacity and possessing excellent intercoat adhesion and sealing properties. It can be over coated sooner than conventional oil undercoats, fill surface imperfections and sands smoothly.

Block & Masonry Filler

Product code: A-BFW

Acrylic Block & Masonry Filler is a professional quality, fast drying, heavily pigmented acrylic sealer designed for use on concrete, blockwork, and cement render.

The product has excellent filling properties to provide a proper barrier between the concrete substrate and external elements. Acrylic Block & Masonry Filler may be top coated with any premium acrylic finish.

Pro-Coat Washable Interior

Product code: A-PIWL

Pro-Coat Washabable Interior is a premium paint formulated for superior resistance against scratches, scuffs and can be easily wiped clean. With excellent colour retention and leveling properties, Pro-Coat Washable Interior offers a lifetime guarantee* against blistering, flaking and peeling.

A high quality, 100% acrylic semi-gloss finish designed to give a hardwearing washable coating in all wall surfaces. The product is easy to apply and results in an easy to maintain highly washable semi-gloss wall finish. May be applied by brush, roller or spray. Contain anti fungicidal additives and may be tinted to a large range of colours. Environmentally friendly, non-toxic, nonhazardous and non-flammable.

Ezi-Cover Ceiling Flat

Product code: A-ECWF

Ezi-Cover Ceiling Flat is a premium quality acrylic water based, minimal odour, high opacity ceiling paint. Low splatter formulation that dries to an ultra-flat finish. Designed to provide high opacity cover on all living area ceilings.

It is easy to apply, non-yellowing and quick drying. Ideal for use in areas with high illumination, excellent for hiding surface imperfections. May be applied by brush, roller or spray. Contain anti fungicidal additives and may be tinted to a range of colours, and is environmentally friendly, non-toxic, nonhazardous and non-flammable.

Endure Enamel

Product code: A-EEWG

Endure Int/Ext Enamel is an ultra-premium oil-based coating with a smooth finish formulated for woodwork, doors and trims.

The Endure Enamel is a premium quality semi-gloss enamel with a smooth, satin like finish. It hard wearing properties and smooth finish make this product ideal for use on doors, windows, skirting boards and all timber and metal surfaces where a hard, tough semi-gloss finish is required.

Elastomeric Texture Membrane

Product code: A-TMW

Elastometric Texture Membrane is a low build flexible coating with a smooth texture finish. An ultra-premium highly durable and flexible water borne elastomeric membrane coating formulated with new generation acrylic resins.

The Elastometric Texture membrane smooth provides a durable crack bridging coating that moves with the substrate without rupturing. A tough weather-proof coating that provides optimum life cycle efficiency to a variety of surfaces. Ideal for protection over cement render, masonry, CFC, rendered AAC, precast concrete, tilt up concrete, brick and masonry block work and on interior masonry and plasterboard surfaces for a decorative finish.

Texture Membrane is smooth when applied with a fine texture roller or 18 mm nap lamb wool roller gives a smooth texture finish with a minimal texture pattern. Refer to in-store sample to decide if this profile is the suitable finish.

H2Pro Water-Based Enamel Interior / Exterior

Product code: A-HEWG

H2Pro Water-Based Enamel Interior/Exterior is ultra-premium finish based on new generation 100% acrylics suitable for both interior and exterior services. It is water-based and hence environment-friendly.

H2Pro Water-Based Enamel Interior/Exterior is easy to apply, dries within half an hour and leaves no trace of unpleasant odour. The product has superior flow and provides wear resistant, non- yellowing film. Low odour and free from solvents.

Waterproofing Membrane

Product code: A-WMW

Waterproofing Membrane is an ultra-premium highly durable and flexible water-thinnable elastomeric membrane coating formulated with new generation acrylic resins.

The product offers excellent long-term durability to surfaces exposed to industrial and commercial environments. Due to its elastic properties and high film build, this product will completely cover cracks without rupturing.

The semi-gloss finish of this product helps to retain the fresh look for years. Waterproofing Membrane is therefore a convenient and versatile option for long term protection.

Heat Reflectant Thermal Membrane

Product code: A-THMW

Heat Reflectant Thermal Membrane coating is an extra tough, high build coating based on highly durable 100% acrylic emulsion designed primarily for the protection of roof surfaces and imparts significant thermal insulation to the interior of buildings.

The product is capable of imparting significant thermal insulation to the interior of buildings. The product has low dirt pick up and excellent water resistance.

Highshield Roof Coat

Product code: A-HSC

Highshield Roof acrylic is a premium, high quality self priming 100% Acrylic based gloss finish for exterior use roofs and tiles. It is flexible, with high durability and offers long lasting weather protection.

Highshield Roof Acrylic provides a non-toxic film when fully dried, has excellent adhesion to the substrate and protection against the sun’s UV rays and punishing rain and weather. It is made in Australia and is specially formulated for protection against the harsh Australian conditions.

WB Concrete Sealer

Product code: A-WCC

Water Based Concrete Sealer is an acrylic sealer for concrete and other cementitious surfaces to help protect the substrate from ingression of dirt.

Anti-Slip Flexible Coating

Product code: A-SFCW

Anti-Slip Flexible Coating is a durable floor paint designed for slip resistance with high flexibility properties. It is ideally used in areas where foot traction is of concern and a great solution to hide hairline cracks caused by foundation movement.

Gattu Flat Plastic

Product code: A-GFPW

Gattu Flat Plastic is a low odour interior tintable water based flat with good coverage. An economy acrylic flat designed for use on interior walls and ceilings.

Concrete Curing Compound

Product code: A-WCCU

Water Based Concrete Curing Compound is an acrylic copolymer curing compound for use on freshly laid concrete. It is formulated to maximize concrete strength and durability for interior and exterior concrete.

ZP Metal Primer

Product code: A-WZPPW

Water Based ZP Metal Primer is a single pack, water based primer containing anti-corrosive pigments. Designed for metal surfaces including galvanised iron, Zincalume, wrought iron, steel, aluminium, copper, brass and stainless steel.