Transformer Blasting & Painting

Omega is preferred specialists in handling rectification works for various energy companies. These particular works involved scaffolding, abrasive blasting and repainting a transformer at the station in South West Sydney.

The works involved a three hour induction for every painter, scaffolder and abrasive blaster onsite. As the works were in a high risk environment, a full time safety officer was employed to ensure all personnel was following WHS requirements at all times.

Dulux was the specified brand for this project. Products included Dulux Zinc Rich Primer WP, Dulux Durepon P14 Primer, and Dulux Luxathane RT. A Dulux representative prepared a COA report approving the application met specification.

4 Ford St, Huntingwood

Omega is on the preferred panel of painting contractors for all Goodman Properties in NSW. The commercial painting and line marking works carried out at 4 Ford St, Huntingwood was successfully completed within 3 weeks.

Six Omega commercial painters were involved in the pressure cleaning, exterior painting, interior warehouse repainting, concrete sealing of 1,600 sqm of floor space and line marking works.

Certain areas were extremely difficult access and unsafe. The managing foreman worked with neighbouring properties seeking permission to use EWP on their respective properties getting the job completed safely and effectively.


DNC Shoes

Dexus Property selected Omega Industries to repair and undertake make-good painting works for their new tenant DNC Shoes

Four commercial painters were onsite for two weeks to complete general plaster repairs, pressure cleaning, external spraying, and internal office painting. The orange feature wall was matched at our Omega Industries manufacturing plant within a 99.5% match to the supplied sample.

External colorbond sheeting was sprayed with an appropriate primer and top coated with an exterior grade paint to ensure a quality and long lasting finish.

The Roost

Omega Industries were selected to repaint external areas of a commercial building located in Alexandria, NSW through a reputable commercial fit-out firm.

Five Omega Industries commercial painters were onsite to paint bare galvanised steel beams and handrails. The scope also required floor coatings to specific corporate green that was matched to 99.5% from the standard supplied.

Since works were carried out during normal hours, staff had to work dynamically and safely to ensure minimum disruption to general surroundings.