fbpx

Weatherblock Exterior Paint

Product code: A-WEWL

WeatherBlock Exterior is a premium self-priming coating designed for long lasting performance against the harsh Australian climate with excellent UV, mould, dirt and mildew resistance. WeatherBlock Exterior has lifetime guarantee* against blistering, flaking and peeling. This acrylic water based semi-gloss finish for exterior use on concrete, cement, bare timber, brick, fibre-cement board, masonry and galvanised iron.

The product is easy to apply, has excellent coverage and low dirt pickup. Self-priming in most cases and quick drying. Water wash up for your paint equipment and no harsh solvent odour. It has Superior Mould Resistance and a Life Time Guarantee*

* Conditions apply, refer to guarantee terms and conditions.

 

 

Features:
Formulated for harsh Australian weather
Excellent colour retention
Mould, dirt and stain resistant
Benefits:
Self-priming
Tested over 30 years
Lifetime guarantee
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

SurePrep 3 in 1

Product code: A-SPW

SurePrep 3 in 1 Acrylic Primer/Sealer/Undercoat is a premium quality, fast drying, water based, interior and exterior multipurpose primer/sealer/undercoat. Formulated primarily to provide a sealed and sandable surface for acrylic and solvent based topcoats.

SurePrep 3 in 1 combines the qualities desired in an interior/exterior primer: Excellent adhesion, and filling properties, low spatter, sandability, minimal odour, excellent flow and levelling. May be applied by brush, roller or spray. Contain anti fungicidal additives and may be tinted to facilitate contrasting colours. Complies with APAS Standard APAS 0172 and is environmentally friendly, non-toxic, nonhazardous and non-flammable.

Features:
Interior / exterior use
Primer, sealer & undercoat
Undercoat for timber and aged enamel, sealer for wallboards and masonry, primer for gal and exterior timber
Benefits:
Low odour
Excellent adhesion
Can be used as an undercoat with other acrylic water based topcoats
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

OilPrep Enamel Undercoat

Product code: A-OW

OilPrep Interior/Exterior Enamel Undercoat is a premium oil based premium undercoat designed as an intermediate coat for all primed timber and metal substrates.

The OilPrep Enamel product is easy sanding, quick drying, providing high opacity and possessing excellent intercoat adhesion and sealing properties. It can be over coated sooner than conventional oil undercoats, fill surface imperfections and sands smoothly.

Features:
Interior / exterior use
High opacity
Undercoat for cabinets, wardrobes, doors, windows, skirting boards and all timber and metal surfaces.
Benefits:
Quick drying
Excellent adhesion
Excellent flow & levelling
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

Block & Masonry Filler

Product code: A-BFW

Acrylic Block & Masonry Filler is a professional quality, fast drying, heavily pigmented acrylic sealer designed for use on concrete, blockwork, and cement render.

The product has excellent filling properties to provide a proper barrier between the concrete substrate and external elements. Acrylic Block & Masonry Filler may be top coated with any premium acrylic finish.

Features:
Interior / exterior use
High build formula
Ideal solution for priming porous substrates
Benefits:
Low odour
Used to fill pinholes
Great alkali & concrete salt resistance
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

Pro-Coat Washable Interior

Product code: A-PIWL

Pro-Coat Washabable Interior is a premium paint formulated for superior resistance against scratches, scuffs and can be easily wiped clean. With excellent colour retention and leveling properties, Pro-Coat Washable Interior offers a lifetime guarantee* against blistering, flaking and peeling.

A high quality, 100% acrylic semi-gloss finish designed to give a hardwearing washable coating in all wall surfaces. The product is easy to apply and results in an easy to maintain highly washable semi-gloss wall finish. May be applied by brush, roller or spray. Contain anti fungicidal additives and may be tinted to a large range of colours. Environmentally friendly, non-toxic, nonhazardous and non-flammable.

Features:
Lifetime warranty
Washable formula
Anti-mould formula
Benefits:
Low VOC
Withstands wear & tear
Available in any competitor colour range
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

Ezi-Cover Ceiling Flat

Product code: A-ECWF

Ezi-Cover Ceiling Flat is a premium quality acrylic water based, minimal odour, high opacity ceiling paint. Low splatter formulation that dries to an ultra-flat finish. Designed to provide high opacity cover on all living area ceilings.

It is easy to apply, non-yellowing and quick drying. Ideal for use in areas with high illumination, excellent for hiding surface imperfections. May be applied by brush, roller or spray. Contain anti fungicidal additives and may be tinted to a range of colours, and is environmentally friendly, non-toxic, nonhazardous and non-flammable.

Features:
Excellent hiding properties
High opacity
Ideal for plasterboard, concrete, timber, exposed ceilings & soffits
Benefits:
Flat finish
Quick drying
Low VOC
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

Endure Enamel

Product code: A-EEWG

Endure Int/Ext Enamel is an ultra-premium oil-based coating with a smooth finish formulated for woodwork, doors and trims.

The Endure Enamel is a premium quality semi-gloss enamel with a smooth, satin like finish. It hard wearing properties and smooth finish make this product ideal for use on doors, windows, skirting boards and all timber and metal surfaces where a hard, tough semi-gloss finish is required.

Features:
Hard wearing alkyd enamel
Excellent flow and levelling
Highly washable
Benefits:
Available in gloss & semi-gloss
Ideal for high traffic areas
Available in any competitor colour range
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

Elastomeric Texture Membrane

Product code: A-TMW

Elastometric Texture Membrane is a low build flexible coating with a smooth texture finish. An ultra-premium highly durable and flexible water borne elastomeric membrane coating formulated with new generation acrylic resins.

The Elastometric Texture membrane smooth provides a durable crack bridging coating that moves with the substrate without rupturing. A tough weather-proof coating that provides optimum life cycle efficiency to a variety of surfaces. Ideal for protection over cement render, masonry, CFC, rendered AAC, precast concrete, tilt up concrete, brick and masonry block work and on interior masonry and plasterboard surfaces for a decorative finish.

Texture Membrane is smooth when applied with a fine texture roller or 18 mm nap lamb wool roller gives a smooth texture finish with a minimal texture pattern. Refer to in-store sample to decide if this profile is the suitable finish.

Features:
400% Elongation flexibility
Ideal for exterior concrete
UV resistant
Benefits:
High build formula
Durable finish
Low odour
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

H2Pro Water-Based Enamel Interior / Exterior

Product code: A-HEWG

H2Pro Water-Based Enamel Interior/Exterior is ultra-premium finish based on new generation 100% acrylics suitable for both interior and exterior services. It is water-based and hence environment-friendly.

H2Pro Water-Based Enamel Interior/Exterior is easy to apply, dries within half an hour and leaves no trace of unpleasant odour. The product has superior flow and provides wear resistant, non- yellowing film. Low odour and free from solvents.

Features:
Interior / exterior use
Most marks can be wiped clean
Hard wearing water-based formula
Benefits:
Quick Dry
Non-yellowing formula
Low odour
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

Waterproofing Membrane

Product code: A-WMW

Waterproofing Membrane is an ultra-premium highly durable and flexible water-thinnable elastomeric membrane coating formulated with new generation acrylic resins.

The product offers excellent long-term durability to surfaces exposed to industrial and commercial environments. Due to its elastic properties and high film build, this product will completely cover cracks without rupturing.

The semi-gloss finish of this product helps to retain the fresh look for years. Waterproofing Membrane is therefore a convenient and versatile option for long term protection.

Features:
Flexible film
Superior adhesion for waterproof protection to structures
UV resistant
Benefits:
High build formula
Durable finish
Low odour
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

Heat Reflectant Thermal Membrane

Product code: A-THMW

Heat Reflectant Thermal Membrane coating is an extra tough, high build coating based on highly durable 100% acrylic emulsion designed primarily for the protection of roof surfaces and imparts significant thermal insulation to the interior of buildings.

The product is capable of imparting significant thermal insulation to the interior of buildings. The product has low dirt pick up and excellent water resistance.

Features:
Provide Thermal Insulation
Ideal for roof surfaces
UV resistant
Benefits:
High build formula
Durable finish
Low dirt pick up
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

Highshield Roof Coat

Product code: A-HSC

Highshield Roof acrylic is a premium, high quality self priming 100% Acrylic based gloss finish for exterior use roofs and tiles. It is flexible, with high durability and offers long lasting weather protection.

Highshield Roof Acrylic provides a non-toxic film when fully dried, has excellent adhesion to the substrate and protection against the sun’s UV rays and punishing rain and weather. It is made in Australia and is specially formulated for protection against the harsh Australian conditions.

Features:
Long lasting film
Ideal for concrete and terracotta tiles
15 Year Warranty*
Benefits:
Low-odour
Non-yellowing
Excellent UV resistance
Downloads

Available in various colours
Contact us for more information and Pro Series stockists
More Information

WB Concrete Sealer

Product code: A-WCC

Water Based Concrete Sealer is an acrylic sealer for concrete and other cementitious surfaces to help protect the substrate from ingression of dirt.

Features:
Low odour
Penetrating sealer
Easy to apply
Benefits:
Non-yellow and UV resistant
Limits salt damage
Environmetally friendly
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

Anti-Slip Flexible Coating

Product code: A-SFCW

Anti-Slip Flexible Coating is a durable floor paint designed for slip resistance with high flexibility properties. It is ideally used in areas where foot traction is of concern and a great solution to hide hairline cracks caused by foundation movement.

Features:
UV and mould resistant
Water-based formula
Slip resistant
Benefits:
Range of colours available
Creates a flexible film
Easily maintenance
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

Gattu Flat Plastic

Product code: A-GFPW

Gattu Flat Plastic is a low odour interior tintable water based flat with good coverage. An economy acrylic flat designed for use on interior walls and ceilings.

Features:
Excellent hiding properties
Low VOC
Easy to apply
Benefits:
Quick drying
Interior use only
Economical solution
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

Concrete Curing Compound

Product code: A-WCCU

Water Based Concrete Curing Compound is an acrylic copolymer curing compound for use on freshly laid concrete. It is formulated to maximize concrete strength and durability for interior and exterior concrete.

Features:
Improves substrate durability
For use on freshly laid concrete
Ensures proper cement hydration
Benefits:
Maximizes concrete strength
Reduces concrete curing times
Interior / exterior use
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information

ZP Metal Primer

Product code: A-WZPPW

Water Based ZP Metal Primer is a single pack, water based primer containing anti-corrosive pigments. Designed for metal surfaces including galvanised iron, Zincalume, wrought iron, steel, aluminium, copper, brass and stainless steel.

Features:
Excellent adhesion
Low VOC
Anti-corrosive properties
Benefits:
For ferrous/non-ferrous metals
Interior/exterior use
Excellent anti-blocking properties
Downloads

Available in various bases and sheens
Contact us for more information and Pro Series stockists
More Information